The exhaust crossover connects to the EGR valve through a cast passage that lets the valve route exhaust gas to the manifold openings. Meanwhile, for inline-type engines, the EGR valve relies on an external tube to carry exhaust gas. This tube is long enough to cool the gas before it enters the EGR valve. The quick answer for blanking the EGR off on a Corsa c 1.4 sxi twin port. If having problems you can also disconnect the EGR 5 pin plug and clear all codes Demontare, curatare si remontare valva EGR pe motor Z12XE Opel Corsa C.I removed and cleaned the EGR valve on a Opel Corsa 1.2 engine

3.a EGR valve (closed position) 3.b EGR valve (open position) 4. exhaust gas inlet (hot, connection to exhaust manifold) 5.a EGR cooler by-pass valve (closed position) 5.b EGR cooler by-pass valve (open position) 6. engine coolant inlet 7. engine coolant outlet 8. exhaust gas outlet (cold, connection to intake manifold)

1 post · Joined 2011. #2 · Jun 10, 2011. It's literally on the right hand side of the engine if you stand at the front of the engine bay. It's a silver cylinder sticking up wards. Got torques bolts and a wiring connector on top and a coolant hose entering it which comes from the bulk head ( from the cabin ). I'm after removing and cleanning

When P0404 is triggered, it means that the PCM has been told that the valve is performing in a way that is outside of its specified parameters. More specifically, the PCM has been told that the valve is closed when it should be open, or vice-versa. P0404 Causes. Faulty EGR valve; Faulty EGR sensor; EGR sensor wiring/connector problems B4ilw.
  • xxjhn1b9go.pages.dev/79
  • xxjhn1b9go.pages.dev/437
  • xxjhn1b9go.pages.dev/212
  • xxjhn1b9go.pages.dev/430
  • xxjhn1b9go.pages.dev/533
  • xxjhn1b9go.pages.dev/304
  • xxjhn1b9go.pages.dev/58
  • xxjhn1b9go.pages.dev/562

    • corsa b egr valve location